Anti-Fog Mirror Film Oval Shape Waterproof Membrane For Clear Vision For Car - Set Of 2

Hydrophobic Coatings:

Round Shape (100*100mm): Apply a hydrophobic coating to the center of the windshield where the driver's line of sight is most important. This can help maintain a clear view directly in front of the driver.

Oval Shape (100*150mm): Apply the hydrophobic coating to a larger area on the windshield, slightly lower than the driver's line of sight. This will ensure a broader field of clear vision.

Remember to follow the manufacturer's instructions for applying and maintaining the hydrophobic coating.

Installation Steps:

Clean the window thoroughly to ensure there is no dirt, grease, or residue on the surface.
Apply the hydrophobic coating according to the product's instructions. This may involve spraying or wiping the coating onto the glass.
Allow the coating to cure as per the manufacturer's recommendations.
After the coating has fully cured, test its effectiveness by spraying water onto the window. If the water beads up and rolls off easily, you have successfully applied the coating.
Maintenance:

Regularly clean the coated area with a gentle glass cleaner to remove dirt and grime, which can affect the coating's performance.
Reapply the hydrophobic coating as needed, typically every few months or as recommended by the manufacturer.
It's important to note that while hydrophobic coatings can greatly improve visibility in rainy conditions, they may not eliminate all water droplets or completely prevent fogging. Good windshield wipers, proper ventilation, and using your car's defogging settings can also contribute to maintaining clear visibility during watery days.